Search
Search

Leather production processes

اشتراک گذاری این مقاله در شبکه های اجتماعی :
زمان تقریبی مطالعه: 2 دقیقه

Leather production processes

The leather manufacturing process is divided into 3 fundamental sub-processes: preparatory stages, tanning and crusting. All true leathers will undergo these sub-processes. A further

sub-process,  surface coating can be  added into the leather  process sequence but not all leathers  receive surface treatment. It’s difficult to  have a list of  operations that all leathers must undergo, as there are so many types of leather.

The preparatory stages are when the hide/skin is prepared for tanning. Preparatory stages may include: preservation, soaking, liming, unhairing, fleshing, splitting, reliming, deliming, bating, degreasing, frizing, bleaching, pickling and depickling.

Tanning 

the process which converts the protein of the raw hide or skin into a stable material which will not putrefy and is suitable for a wide variety of end applications.  The principal difference between raw hides and tanned hides is that raw hides dry out to form a hard inflexible material that when re-wetted (or wetted back) putrefy, whilst tanned material dries out to a flexible form that does not become putrid when wetted back. There is a large number of different tanning methods and materials that can be used, the choice is ultimately dependent on the end application of the leather. The most commonly used tanning material is chromium, which leaves the leather once tanned a pale blue colour (due to the chromium), this product is commonly called “wet blue”. The hides once they have finished pickling will typically be between pH of 2.8-3.2. At this point the hides would be loaded in a drum and immersed in a float containing the tanning liquor. The hides are allowed to soak (while the drum slowly rotates about its axle) and the tanning liquor slowly penetrates through the full substance of the hide. Regular checks will be made to see the penetration by cutting the cross section of a hide and observing the degree of penetration. Once a good even degree of penetration exists, the pH of the float is slowly raised in a process called basification. This basification process fixes the tanning material to the leather and the more tanning material fixed the higher the hydrothermal stability and increased shrinkage temperature resistance of the leather. The pH of the leather when chrome tanned would typically finish somewhere between 3.8-4.2.

Crusting

In this stage the hide/skin is thinned, re tanned and lubricated. Often a coloring operation is included in the crusting sub-process. The chemicals added during crusting have to be fixed in place. The culmination of the crusting sub-process is the drying and softening operations.

Crusting include the following operations: wetting back, sammying, splitting, shaving, rechroming neutralisation, retanning, dyeing, fatliquoring, filling, stuffing, stripping, whitening, fixation, setting, drying, conditioning, milling, staking and buffing

www.ariamontakhab.com

دیدگاهتان را بنویسید

لطفا به این مطلب امتیاز دهید*

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

هشت + چهارده =

مهم: قیمت دولتی و اتحادیه جوجه گوشتی با نامه بین 15.900 تا 16.900 تومان می باشد.


محصول آخرین میانگین قیمت + تغییر 24h مشاهده
جوجه یک روزه گوشتی  1403/1/9 20,750  ( 0) مشاهده
جوجه بومی  1403/1/9 105,425  ( 0) مشاهده
اردک  1403/1/9 69,084  ( 0) مشاهده
مرغ زنده  1403/1/9 57,046  ( 0) مشاهده
مرغ کشتار  1403/1/9 82,323  ( 0) مشاهده
خروس زربال  1403/1/9 25,500  ( 0) مشاهده
خروس آرین  1403/1/9 11,500  ( 0) مشاهده
تخم مرغ  1403/1/9 45,500  ( 0) مشاهده
کبک  1403/1/9 63,034  ( 0) مشاهده
جوجه بوقلمون  1403/1/9 181,417  ( 0) مشاهده
شتر مرغ زنده  1403/1/9 1,755,500  ( 0) مشاهده
بلدرچین زنده  1403/1/9 18,025  ( 0) مشاهده
پولت  1403/1/9 84,250  ( 0) مشاهده
ایکون